Call 08048718849 78% Response Rate

Send Email

Fuel Testing Equipments

Pioneers in the industry, we offer cold filter plugging point test apparatus ip 309, din en 116, sis 155 122, micro carbon residue tester astm d-4530, total sediment analyser, oxidation characteristics, oil centrifuge with heating and existent gum bath from India.
Cold Filter Plugging Point Test Apparatus Ip 309, Din En 116, Sis 155 122

Cold Filter Plugging Point Test Apparatus Ip 309, Din En 116, Sis 155 122

Product Price: Rs 8.73 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Insulation WallSingle Wall
MaterialCRCA Powder Coated
BrandWADEGATI
Voltage230 volts
Power230 Volt AC, 1 Phase, 50 Hz.
Size97W X 65D X 78H Cm
Temperature-72 deg cel to Ambient
Country of OriginMade in India
TestingAs per ASTM D-6371, IP 309. Manual model.

As per IP 309, IS:1448 (P 110). Manually operated model.

Features:

  • Determines the low temperature flow characteristics of automotive diesel fuels and gas oils, including samples with flow improving additives, by measuring the temperature at which the sample ceases to flow through a wire mesh filter under standard test conditions.
  • The equipment comprises of Cryostat upto –60°C, CFPP test kit and Vacuum device.
  • Air jacket, flat bottom test jar, washer, spacer ring, test tube, filter assembly with a 45 micrometer mesh test sieve, sliding sieve and a thermometer.
  • Complete with pressure equalizing vessel, U-tube manometer, three way cock and electric Vacuum Pump.
  • Fully automatic digital temperature controller with PT-100 sensor.
  • A well balance CFC-free cascade refrigeration system with eco-friendly refrigerant.
  • Power supply : 230 V, 1 Phase, 50 Hz.

.



Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
  • Production Capacity: 25 Nos
  • Delivery Time: 2 Months
  • Packaging Details: 97W X 65D X 78H Cm 148.0 Kg
Get Best QuoteRequest Callback
Micro Carbon Residue Tester Astm D-4530

Micro Carbon Residue Tester Astm D-4530

Product Price: Rs 4.99 Lakh / UnitGet Best Price

Product Brochure

Product Details:
MaterialCRCA powder coated
Model Name/NumberWIL457
Usage/ApplicationPetroleum Testing Equipment
Type Of Testing MachinesPetroleum Testing Equipment
ColorSiemens Grey
Packaging TypeWooden Box
Display TypeDigital
BrandWADEGATI LABEQUIP PVT LTD
GradeSemi-Automatic
SupplyAC
Power230 Volt AC, 1 Phase, 50 Hz
Voltage230 Volts

MICRO CARBON RESIDUE TESTER

ASTM D-4530

 

This test method covers the determination of the amount of carbon residue formed after evaporation and pyrolysis of petroleum materials under certain conditions and is intended to provide some indication of the relative coke forming tendency of such materials. The test results are equivalent to the Conradson carbon residue test.

Glass Sample Vials : 2ml capacity, 12mm outside diameter by approximately 35mm height. Larger 4-dram glass sample vials, 15ml capacity (20.5 to 21mm outside diameter by 70 +1mm height) may be used for samples that are expected to yield residues <0.10% (m/m) so that a more appreciable mass difference can be determined. It should be noted the precision statements for the test method were determined using the 2ml capacity vials only (with sample residues between 0.3 and 26% (m/m) and that the precision associated with using the larger sample vials has not been determined.

Coking Oven : With circular heating chamber approximately 85mm in diameter by 100mm deep, for top loading, with heating capability from 10 to 40°C/min rate to 500°C, with exhaust port 13mm inside diameter for nitrogen purge of oven chamber (inlet near top, exhaust at bottom center) with thermo couple sensor located in oven chamber next to but not touching sample vials, with lid capable of sealing out air and with removable condensate trap located at the oven chamber base.

Sample Vial Holder : Cylindrical aluminum block, approximately 76mm in diameter by 16mm thick, with 12 evenly spaced holes (for vials) each 13mm in diameter by 13mm deep. The holes are arranged in a circular pattern approximately 3mm from the perimeter. The holder has legs 6mm long, with guides to center in oven chamber and an index mark on the side to use as position reference.

Power supply : 230 +10% Volt AC, 1 Phase, 50 Hz.

Get Best QuoteRequest Callback
Total Sediment Analyser
  • Total Sediment Analyser
  • Total Sediment Analyser

Total Sediment Analyser

Product Price: Rs 6.86 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Product Details:
BrandWadegati Labequip Pvt Ltd
Usage/ApplicationPetroleum Product Testing Equipment
MaterialCRCA Powder coated
PhaseSingle Phase
Model Name/NumberWIL477
Heating Temperature100 deg cel
Country of OriginMade in India

TOTAL SEDIMENT ANALYSER

ASTM D-4870, IP 375, ISO:10307-2 (Procedure A)

 

·         Consist of Ageing bath and filtration assembly as per requirement of above method.

·         Digitally controlled Oil Bath with Micro-PID controller, heating & circulatory system.

·         Bath is fitted with Four Air Wells strictly as per dimension mentioned in test method.

·         In-built timer with 99 hours. Timer shall cut-off the heater after set time is elapsed.

·         Glass Air condenser 8 numbers as per above test method.

·         6 numbers of 50ml capacity conical flask complying with ISO:3733.

·         Filtration apparatus assembly consists of 2 filtration cells, heating (steam) & cooling water circuits, vacuum circuit, buchner flask with safety cover & gauge.

·         Each filtration cell consists of steam heated / water cooled brass cup with a sintered brass disc to support the microfiber filters.

·         Producing steam heating and maintaining temperature at 100 +1°C.

·         Vacuum source and vacuum gauge provided strictly as per test method.

·         Glass fiber filters: Whatman GF/A or equivalent packs – 2 numbers packs.

·         Power supply : 230 ±10% Volt AC, 1 Phase, 50 Hz.



Additional Information:

  • Item Code: WIL477
  • Production Capacity: 15 Nos
  • Delivery Time: 2 Months
Get Best QuoteRequest Callback
Oxidation Characteristics
  • Oxidation Characteristics
  • Oxidation Characteristics
  • Oxidation Characteristics

Oxidation Characteristics

Product Price: Rs 8.86 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Product Details:
BrandWADEGATI LABEQUIP PVT LTD
Insulation WallDouble Wall
Usage/ApplicationFUEL TESTING EQUIPMENT
MaterialCRCA Powder Coated
Voltage230 volts
Power230 Volt AC, 1 Phase, 50 Hz.
Country of OriginMade in India

 

OXIDATION CHARACTERISTICS

ASTM D 943 – For Inhibited Mineral Oils

ASTM D 2274 – For Distillate Fuel Oil (Accelerated Method)

ASTM D 2893 – For Extreme Pressure Lubrication Oils.

 

·         ASTM D-943 For Inhibited Mineral Oils – This test method covers the evaluation of the oxidation stability of inhibited steam-turbine oils in the presence of oxygen, water, copper and iron metals at an elevated temperature.

·         ASTM D-2274 For Distillate Fuel Oil (Accelerated Method) – This test method covers the measurement of the inherent stability of middle distillate petroleum fuels under specified oxidizing conditions at 950C.

·         ASTM D-2893 For Extreme Pressure Lubrication Oils – This test method covers the determination of the oxidation characteristics of extreme-pressure fluid lubricants, gear oils or mineral oils.

·         Common Constant temperature oil bath, Inner stainless steel & outer powder coated.

·         Six place model with flexible flow meter choice.

·         Equipped with oil immersion heaters, circulatory system, lid with six openings to receive 6 test assembly & drain cock.

·         Temperature range above ambient to 180°C, +1°C. Rating 2.5 kw.

·         Flow meter arrangement consisting of 6 flow meters with needle valve to precisely  regulates Oxygen flow rate at 3 L/H with an accuracy of +0.1 L/H. The assembly conforms to ASTM D-943. (Oxygen cylinder not provided).

·         Flow meter arrangement consisting of 6 flow meters with needle valve to precisely regulates Oxygen flow rate at 3 L/H with an accuracy of +0.3 L/H. The assembly conforms to ASTM D-2274. (Oxygen cylinder not provided).

·         Flow meter arrangement consisting of 6 flow meters with needle valve to precisely regulates Compressed Air flow rate at 10 L/H with an accuracy of +0.5 L/H. The assembly conforms to ASTM     D-2893.

·         Set of six Oxidation cells consisting of six test tubes, six Oxygen delivery tubes, six condensers, all conforming to ASTM D-943 & ASTM D-2274.

·         Set of six air delivery tubes of 41 +0.5mm inside diameter and 600mm in length with slotted corks, all conforming to ASTM D-2893.

 



Additional Information:

  • Item Code: WIL485
  • Production Capacity: 15 Nos
  • Delivery Time: 2 Months
Get Best QuoteRequest Callback
Oil Centrifuge With Heating

Oil Centrifuge With Heating

Product Price: Rs 9.76 Lakh / NumberGet Best Price

Minimum Order Quantity: 1 Number

Product Details:
Automatic GradeSemi-Automatic
Capacitystandardized
DesignStandard
Brandstandardized
Power Consumptionstandardized
Country of OriginMade in India

Our company excels in the domain of manufacturing, supplying and exporting best quality Oil Centrifuge with Heating for our wide range of customers present in the market. We have a commendable demand for these centrifuges for their multi functioning in determining sediments and water contents in crude oil, fuel oils and middle distillate fuels. These centrifuges are made with flameproof AC motor with AC frequency drive. These fulfill international safety standards and have safety interlock to prevent centrifuge operation during unlocked lid. Apart from this, these are available at affordable rates in market.

 

Features:

  • Made as per the international safety standards
  • Interlock safety to prevent unwanted centrifuge
  • Flameproof motor

 

Application Area:

  • Used in field of centrifuge and heating
  • Applied in distillate refining companies

As per ASTM D 4007.


  • With centrifuging chamber, swing out rotor head, 4 test place with test tubes, buckets, pads and rack to accommodate 4 tubes.
  • RPM meter with variable speed control,
  • Maximum RPM 1850

Specifications:

  • Temperature digitally controlled up to 930C
  • Timer: 0 to 60 minutes.
  • Capacity for 200 mm long 37 mm dia tapered bottom 100 ml centrifuge tubes
  • Power supply: 220 V, 1 Phase, 50 Hz


Additional Information:

  • Pay Mode Terms: T/T (Bank Transfer)
Get Best QuoteRequest Callback
Existent Gum Bath

Existent Gum Bath

Product Price: Rs 6.19 Lakh / NumberGet Best Price

Minimum Order Quantity: 1 Number

Product Brochure

Product Details:
Usage/ApplicationDetermination of Existing Gum in petroleum products.
Model Name/NumberWIL-441
Temperature Range300 deg cel
BrandWADEGATI
Country of OriginMade in India
    Features:

    • Comprising of solid block bath for five test beakers.
    • Fully automatic digital temperature controller.
    • The design of the block and the manifold will be ensured even temperature distribution over the five test walls.
    • Air or steam can be used without additional heating, the bath and flow indicator being calibrated for each medium.
    • The apparatus will be supplied with five taper fit conical air outlet adaptors and five borosilicate glass beakers ready for connection to air or steam.
    • Power supply : 230 V, 1 Phase, 50 Hz


      Additional Information:

      • Item Code: WIL-441
      • Production Capacity: 10 Nos
      • Delivery Time: 2 Months
      Get Best QuoteRequest Callback
      Cloud And Pour Point Tester (3, 4 & 5 Compartment Model)
      • Cloud And Pour Point Tester (3, 4 & 5 Compartment Model)
      • Cloud And Pour Point Tester (3, 4 & 5 Compartment Model)
      • Cloud And Pour Point Tester (3, 4 & 5 Compartment Model)

      Cloud And Pour Point Tester (3, 4 & 5 Compartment Model)

      Product Price: Rs 5.96 Lakh / UnitGet Best Price

      Minimum Order Quantity: 1 Unit

      Product Brochure

      Product Details:
      Model Name/NumberWIL-471
      Usage/ApplicationPetroleum Testing Equipment
      Type Of Testing MachinesPetroleum Testing Equipment
      ColorCRCA powder coated
      Packaging TypeWooden Box
      BrandWADEGATI LABEQUIP PVT LTD
      GradeSemi-Automatic
      MaterialCLOUD AND POUR POINT TESTER ASTM D-97, ASTM D-2500, IP15, ISO:3016 & DIN 51597
      SupplyAC
      Power230 Volt AC, 1 Phase, 50 Hz
      Voltage230 Volts
      PhaseSingle
      Country of OriginMade in India

      CLOUD AND POUR POINT TESTER

      As per ASTM D-97, ASTM D-2500, IP 15, DIN 51597.

       

      ·         Cloud & pour point are indicators of the lowest temperature of utility for petroleum products. The sample is periodically examined while it is being cooled in the cloud & pour point apparatus. The highest temperature at which haziness is observed (cloud point) or the lowest temperature at which movement of the oil is observed (pour point) is reported as the test result.

      ·         Three, Four and Five test chambers.

      ·         Individual built in CFC-free single / cascade refrigeration system with eco-friendly refrigerant.

      ·         Individual digital temperature control system.

      ·         Each compartment is designed to accommodate 4 test jars at a time.

      ·         Each compartment is having 4 test jackets.

      ·         Temperature : 0°C, -17°C, -34°C, -51°C and -71°C.

      ·         Power supply : 230 V, 1 Phase, 50 Hz.



      Additional Information:

      • Item Code: WIL471
      • Production Capacity: 20 Nos
      • Delivery Time: 2 Months
      Get Best QuoteRequest Callback

      EXPLORE MORE CATEGORIES

      Looking For "Fuel Testing Equipments"?
      Thank youYour Enquiry has been sent successfully.
      © Wadegati Labequip Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.