Call 08048718849 78% Response Rate

Send Email

Grease Testing Equipment

We are a leading Exporter of deleterious particles astm astm d-1404, is:1448, p-125, high temperature wheel bearing grease tester astm d-3527, astm d-4290, wide temperature range of dropping point grease, corrosion preventive as per astm d-1743., oil separation (during storage) as per astm d-1742 and copper corrosion astm d4048 from Mumbai, India.
DELETERIOUS PARTICLES ASTM  ASTM D-1404, IS:1448, P-125

DELETERIOUS PARTICLES ASTM ASTM D-1404, IS:1448, P-125

Product Price: Rs 47,750 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
MaterialStainless Steel
Model Name/NumberWIL580
Usage/ApplicationGREASE TESTING EQUIPMENT
Type Of Testing MachinesGREASE TESTING EQUIPMENT
Colorstainless steel
BrandWADEGATI LABEQUIP PVT LTD
GradeManual
Country of OriginMade in India

DELETERIOUS PARTICLES ASTM

ASTM D-1404, IS:1448, P-125

·         Evaluates deleterious particle contamination in lubricating greases. Complete with plastic test plate, calibrated spring with scale.

 



Additional Information:

  • Item Code: WIL580
  • Production Capacity: 25 Nos
  • Delivery Time: 2 Months
Get Best QuoteRequest Callback
High Temperature Wheel Bearing Grease Tester ASTM D-3527, ASTM D-4290
  • High Temperature Wheel Bearing Grease Tester ASTM D-3527, ASTM D-4290
  • High Temperature Wheel Bearing Grease Tester ASTM D-3527, ASTM D-4290

High Temperature Wheel Bearing Grease Tester ASTM D-3527, ASTM D-4290

Product Price: Rs 11.39 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Product Details:
MaterialStainless Steel
Insulation WallDouble Wall
Model Name/NumberWIL573
Usage/ApplicationGREASE TESTING EQUIPMENT
Type Of Testing MachinesGREASE TESTING EQUIPMENT
ColorGREASE TESTING EQUIPMENT
Packaging TypeWooden Box
BrandWADEGATI LABEQUIP PVT LTD
Voltage230 volts
Power230 Volt AC, 1 Phase, 50 Hz.
GradeSemi-Automatic
SupplyAC
PhaseSingle
Country of OriginMade in India

HIGH TEMPERATURE WHEEL BEARING GREASE TESTER

ASTM D-3527, ASTM D-4290

 

 

·         This test method covers a laboratory procedure for evaluating the high-temperature life performance of wheel bearing greases when tested under prescribed conditions.

·         The test grease is distributed in the bearings of a modified, automobile front wheel hub-spindle-bearings assembly. While the bearings are thrust-loaded to 111 N, the hub is rotated at 1000rpm and the spindle temperature maintained at 160°C for 20 h, 4 h off operating cycle. The test is terminated when grease deterioration causes the drive motor torque to exceed a calculated motor cut off valve. Grease life is expressed as the accumulated on cycle hours.

·         Consists of a modified front wheel hub-spindle-bearings assembly housed in a constant temperature oven and coupled to a variable speed drive motor. Control test functions automatically and provides continuous digital display of motor torque, rpm, chamber temperature, spindle temperature, time cycle and elapsed time. Spindle drive motor with 1725 rpm speed control for the hub.

·         Automatically terminates test and displays elapsed oncycle hours when grease deterioration causes drive motor torque to increase to the calibrated end point. A build-in 30 second time delay circuit prevents erroneous test terminations due to momentary surges in motor torque at the beginning of the on-cycle. Insulated constant temperature oven is equipped with a 1800 watts heater and air circulation fan for efficient heat distribution.

·         Digitally control oven to maintain spindle temperature at 160° C, ±1.50°C. Sliding access doors and a movable platform that swings the drive motor out of the way provide easy access to the spindle assembly. Modified steel spindle and hub assembly conforms to above test method and is fitted with thermo couple, bearing thrust loading device and anodized aluminum grease collector.

·         Power supply : 230 ±10% Volt AC, 1 Phase, 50 Hz.



Additional Information:

  • Item Code: WIL573
  • Production Capacity: 15 Nos
  • Delivery Time: 2 Months
Get Best QuoteRequest Callback
Wide Temperature Range Of Dropping Point Grease

Wide Temperature Range Of Dropping Point Grease

Product Price: Rs 3.86 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Product Details:
MaterialStainless Steel
Model Name/NumberWIL 566
Usage/ApplicationGREASE TESTING EQUIPMENT
Type Of Testing Machines75 W x 40 D x 35 H Cm
Color75 W x 40 D x 35 H Cm
Packaging TypeWooden Box
Display TypeDigital
BrandWADEGATI LABEQUIP PVT LTD
GradeManual
SupplyAC
Power230 Volt AC, 1 Phase, 50 Hz
Voltage230 Volts
PhaseSingle
Part NumberWIL566
Country of OriginMade in India

WIDE TEMPERATURE RANGE OF DROPPING POINT GREASE

ASTM D-2265

 

·         The dropping point test permits higher temperature than the ASTM D-566 method and uses a different heating procedure; the test cell is inserted in an aluminum block oven maintained at a constant temperature that is higher than the expected dropping point of the sample. The sample temperature then rises to the dropping point without operator control.

 

·         6 unit oven with automatic microprocessor based digital temperature controller, comprising aluminium block oven, enclosed in a rectangular metal housing, heavily provided by means of ceramic insulating slabs. The block has 6 wells for the vertical insertion of the test tubes and 6 horizontal drill holes for the observation and the illumination of the test zone below the grease cup. Mounted on the rear side of the metal housing at horizontal drill hole level there are the lamp unit and the reflector.

 

·         The mercury thermometer provided to read the dropping point. ASTM 3C thermometer with calibration certificate.

 

·         Temperature range : Above ambient to 400ºC, ±0.5ºC.

 

·         Capacity : 6 Stage



Additional Information:

  • Item Code: WIL566
  • Production Capacity: 15 Nos
  • Delivery Time: 2 Months
  • Packaging Details: 75 W x 40 D x 35 H Cm 65 Kg
Get Best QuoteRequest Callback
Corrosion Preventive As Per ASTM D-1743.
  • Corrosion Preventive As Per ASTM D-1743.
  • Corrosion Preventive As Per ASTM D-1743.

Corrosion Preventive As Per ASTM D-1743.

Product Price: Rs 2.46 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Details:
Model Name/NumberWIL570
Usage/ApplicationGREASE TESTING EQUIPMENT
Type Of Testing MachinesGREASE TESTING EQUIPMENT
ColorGREASE TESTING EQUIPMENT
Packaging TypeWooden Box
Display TypeDigital
Automation GradeManual
BrandWADEGATI LABEQUIP PVT LTD
Voltage230 volts
GradeSemi-Automatic
SupplyAC
Power230 Volt AC, 1 Phase, 50 Hz
PhaseSingle
Country of OriginMade in India

CORROSION PREVENTIVE

As per ASTM D-1743.

·         This test method covers the determination of the corrosion preventive properties of greases using grease-lubricated tapered roller bearings stored under wet conditions.

·         Apparatus Consists of : Bearing : Timken bearing cone and roller assemblies.
Motor : 1750 ±50 rpm with digital rpm meter with speed regulator.
Bearing Holder : 1 Kg weight.
Plastic test jar, Run-in stand, Spindle/Thrust Loading device, Mechanical Grease Packer, Pliers, Syringe

·         Power supply : 230 ±10% Volt AC, 1 Phase, 50 Hz.



Additional Information:

  • Item Code: WIL-570
  • Production Capacity: 20 Nos
  • Delivery Time: 2 Months
Get Best QuoteRequest Callback
Oil Separation (During Storage)  As Per ASTM D-1742

Oil Separation (During Storage) As Per ASTM D-1742

Product Price: Rs 4.16 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Product Details:
MaterialStainless Steel
Usage/ApplicationGREASE TESTING EQUIPMENT
Type Of Testing MachinesGREASE TESTING EQUIPMENT
ColorGREASE TESTING EQUIPMENT
Packaging TypeWooden Box
Model Name/NumberWIL569
BrandWADEGATI LABEQUIP PVT LTD
GradeSemi-Automatic
SupplyAC
Power230 Volt AC, 1 Phase, 50 Hz
Voltage230 Volts
PhaseSingle
Country of OriginMade in India

OIL SEPARATION (DURING STORAGE)

As per ASTM D-1742

 

·         Determines the tendency of lubricating grease to separate oil during storage.

·         Consists of pressure bleeding test cells with air pressure regulator system and constant temperature air cabinet.

·         Bleeding Cell: Type A test cell consisting of cup with funnel, cover with air inlet, 200 mesh stainless steel strainer.
All made of stainless steel.

·         Constant Temperature Air Cabinet: Maintain constant temperature at 25°C ± 0.5°C throughout the test duration.
Provided with inbuilt cooling, heating, air circulation and digital control system.
Pressure regulator, pressure gauges and pressure valves are fitted on the outer casing of air cabinet.
Capacity to accommodate 4 test cells.

·         Power supply: 230 ±10% Volt AC, 1 Phase, 50 Hz.



Additional Information:

  • Item Code: WIL569
  • Production Capacity: 25 Nos
  • Delivery Time: 2 Months
Get Best QuoteRequest Callback
Copper Corrosion ASTM D4048

Copper Corrosion ASTM D4048

Product Price: Rs 98,750 / UnitGet Best Price

Product Brochure

Product Details:
Insulation WallDouble Wall
MaterialCRCA Powder Coated
Automation GradeSemi-automatic
BrandWADEGATI LABEQUIP PVT LTD
Voltage230 volts
Power230 Volt AC, 1 Phase, 50 Hz.
TemperatureAmbient to 190 deg cel
Country of OriginMade in India

COPPER CORROSION

ASTM D4048

 

·         Determines the tendency of lubricating grease to corrode copper at elevated  temperature.

·         Greases are tested in a circulating air oven using test jars.

·         Microprocessor based PID digital temperature controller with Cr/Al sensor.

·         Digital pre-setting timer.

·         emperature range : Ambient to 190°C, ±1°C.

·         Power supply : 230 ±10%Volt AC, 1 Phase,

Get Best QuoteRequest Callback
Oil Separation (ASTM D6184) (IP 121)
  • Oil Separation (ASTM D6184) (IP 121)
  • Oil Separation (ASTM D6184) (IP 121)

Oil Separation (ASTM D6184) (IP 121)

Product Price: Rs 24,750 / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Product Details:
MaterialGlass & Copper
Model Name/NumberWIL567
Usage/ApplicationGREASE TESTING EQUIPMENT
Type Of Testing MachinesGREASE TESTING EQUIPMENT
ColorGREASE TESTING EQUIPMENT
Packaging TypeWooden Box
BrandWADEGATI LABEQUIP PVT LTD
GradeManual
Country of OriginMade in India

OIL SEPARATION (IP 121)

·         Provide a useful guide of the stability of lubricating grease towards oil separation during storage.

·         Consists of grease cup with metal gauge cone, load weight and oil collecting cup.

 

OIL SEPARATION (ASTM D6184)

·         Evaluates the tendency of oil and lubricating grease to separate at an elevated temperature.

·         Consists of 60 mesh cone with wire handle. 200ml glass beaker & cover with hook.



Additional Information:

  • Item Code: WIL567
  • Production Capacity: 100 Nos
  • Delivery Time: 15 DAYS
Get Best QuoteRequest Callback
Drop Point Of Grease

Drop Point Of Grease

Product Price: Rs 60,750 / NumberGet Best Price

Minimum Order Quantity: 1 Number

Product Brochure

Product Details:
MaterialCRCA powder coated
Model Name/NumberWIL565
Usage/ApplicationGREASE TESTING EQUIPMENT
Type Of Testing MachinesGREASE TESTING EQUIPMENT
ColorGREASE TESTING EQUIPMENT
Packaging TypeWooden Box
GradeManual
SupplyAC
Power230 Volt AC, 1 Phase, 50 Hz
Voltage230 Volts
PhaseSingle
Part NumberWIL565
TemperatureAmbient to 288 deg cel
BrandWADEGATI LABEQUIP PVT LTD
Country of OriginMade in India
TESTINGDetermination of the dropping point of lubricating grease
    Features:

    • Dropping point determinations are used for identification and quality control purposes and can be an indication of the highest temperature of utility for some applications. The sample is heated at a prescribed rate in a precision machined cup whose sides slope toward an opening at its center. The temperature at which a liquid drop first falls from the cup is the dropping point of the sample.
    • Consists of electrical heater with temperature control and motorized stirrer.
    • Complete with 400 ml beaker, holding cover, metal test cup, glass test tube, stopper, spacer ring, clamps for mounting the whole assembly on to the column of stand, heater board with 50 mm dia.
    • Power supply : 230 V, 1 Phase, 50 Hz.


      Additional Information:

      • Item Code: WIL565
      • Production Capacity: 30 Nos
      • Delivery Time: 2 Months
      Get Best QuoteRequest Callback
      Oxidation Stability Bath
      • Oxidation Stability Bath
      • Oxidation Stability Bath

      Oxidation Stability Bath

      Product Price: Rs 4.26 Lakh / NumberGet Best Price

      Minimum Order Quantity: 1 Number

      Product Details:
      MaterialCRCA powder coated
      Model Name/NumberWIL568
      Usage/ApplicationGREASE TESTING EQUIPMENT
      Type Of Testing MachinesGREASE TESTING EQUIPMENT
      ColorGREASE TESTING EQUIPMENT
      Packaging TypeWooden Box
      Display TypeDigital
      GradeSemi-Automatic
      SupplyAC
      Power230 Volt AC, 1 Phase, 50 Hz
      Voltage230 Volts
      PhaseSingle
      Part NumberWIL568
      BrandWADEGATI LABEQUIP PVT LTD
      Country of OriginMade in India
        Features:

        • This method covers the determination of the resistance of lubricating greases to oxidation when stored under static conditions for long period of time.
        • T wo bomb oxidation stability bath f or use with aqueous bath liquids, equipped with digital temperature control, stirrer and oil immersion heater. The bath lid is having 2 openings.
        • Power supply : 230 V, 1 Phase, 50 Hz.


            Additional Information:

            • Item Code: WIL568
            • Pay Mode Terms: T/T (Bank Transfer)
            • Production Capacity: 15 Nos
            • Delivery Time: 2 MONTHS
            Get Best QuoteRequest Callback
            GREASE PENETROMETER

            GREASE PENETROMETER

            Product Price: Rs 75,750 / UnitGet Best Price

            Minimum Order Quantity: 1 Unit

            Product Brochure

            Product Details:
            MaterialMild Steel
            Model Name/NumberWIL574
            Usage/ApplicationGREASE TESTING EQUIPMENT
            Type Of Testing MachinesGREASE TESTING EQUIPMENT
            ColorGREASE TESTING EQUIPMENT
            Packaging TypeWooden Box
            Display TypeDigital
            BrandWADEGATI LABEQUIP PVT LTD
            GradeSemi-Automatic

            PENETROMETER

            ASTM D217

             

            ·         This test method cover procedure for measuring the consistency of lubricating greases by the penetration of a cone of specified dimensions, mass & finish. The penetration is measured in tents of a millimeter,

            ·         Complete with geared arrangement for moving the arm with geared centering device.

            ·         Brass cone, grease container, 50 & 100 grams weights, base plate, needle & dial.

            ·         Pre-setting digital timer.

            ·         Power supply: 230±10% Volt AC, 1 Phase, 50 Hz.



            Additional Information:

            • Item Code: WIL574
            • Production Capacity: 15 Nos
            • Delivery Time: 2 Months
            Get Best QuoteRequest Callback
            Grease Worker Testing Equipment

            Grease Worker Testing Equipment

            Product Price: Rs 1.16 Lakh / NumberGet Best Price

            Minimum Order Quantity: 1 Number

            Product Brochure

            Product Details:
            Model Name/Numberstandardized
            Display TypeDigital
            Load Capacitystandardized
            BrandWADEGATI
            GradeManual
            Weightstandardized
              We offer Grease worker which has the following features:

              • Prolonged worked penetration test to determine consistency of Lubricating Greases.
              • Equipped with presetting digital counter that automatically shuts off the drive motor after any desired number of strokes up to 100,000.
              • Grease worker comprises of threaded cup, cover and steel plunger plate with shaft and handle that connects to eccentric cam on driven unit.
              • The design is such that a rate of 60 ± 10 storkes per minutes with a minimum length of 67 mm is maintained.
              • Power supply 230 V, 1 Phase, 50 Hz.


                Additional Information:

                • Item Code: WIL-577
                • Pay Mode Terms: T/T (Bank Transfer)
                Get Best QuoteRequest Callback
                Emcor Rust Test As per IP220, DIN 51802, 4/6/8 Stage unit

                Emcor Rust Test As per IP220, DIN 51802, 4/6/8 Stage unit

                Product Price: Rs 3.95 Lakh / NumberGet Best Price

                Minimum Order Quantity: 1 Number

                Product Brochure

                Product Details:
                MaterialMild Steel
                Model Name/NumberWIL-571
                Usage/ApplicationGREASE TESTING EQUIPMENT
                Type Of Testing MachinesGREASE TESTING EQUIPMENT
                ColorSiemens Grey
                Packaging TypeWooden Box
                Display TypeDigital
                Load Capacity4/6/8 TEST
                BrandWADEGATI
                GradeSemi-Automatic
                SupplyAC
                Power230 Volt AC, 1 Phase, 50 Hz
                Voltage230
                PhaseSingle
                Part NumberWIL-571
                  Features:

                  • Measures the ability of a grease to protect a bearing against corrosion in the presence of water. Two sets of grease-coated bearings per station are partially immersed in water and rotated at a speed of 80 rpm in a sequence of running and resting periods. At end of the test, the raceways of the bearing outer rings are inspected for rust.
                  • Performs both standing and dynamic test of lubricating greases and oils.
                  • Consisting of : Test rig with base plate, electric motor with gear and run/stop electronic timer, steel shaft, plummer blocks, self-aligning ball bearings, adapter sleeves, sleeve nuts and V-ring seals.
                  • Power supply 220 V, 1 Phase, 50 Hz


                      Additional Information:

                      • Item Code: wil-571
                      • Pay Mode Terms: T/T (Bank Transfer)
                      • Production Capacity: 50 Nos
                      • Delivery Time: 2 Months
                      • Packaging Details: 110W X 25D X 25H Cm 115 kg
                      Get Best QuoteRequest Callback
                      Leakage Tendencies Tester of  Wheel Bearing Grease ASTM D-1263

                      Leakage Tendencies Tester of Wheel Bearing Grease ASTM D-1263

                      Product Price: Rs 1.36 Lakh / NumberGet Best Price

                      Product Brochure

                      Product Details:
                      Type Of Testing MachinesGREASE TESTING MACHINE
                      Display TypeDigital
                      MaterialIron
                      Voltage440
                      Automation GradeSemi-Automatic
                      Power440 volt 3 phase
                      Phase3
                      BrandWADEGATI
                      Country of OriginMade in India
                        As per ASTM D-1263
                        Features:


                        • Evaluates the tendency of automotive wheel bearing grease to separate oil or grease under prescribed laboratory conditions. The test is performed at elevated temperature in a modified automotive spindle-hub assembly rotated at 660 rpm. Any leakage of oil or grease during the test period is collected and weighed.
                        • Comprising of digitally controlled oven of steel construction.
                        • Electrically heating with electric motor for forced air circulation.
                        • Wheel bearing spindle, front wheel hub, driving belt pulley, grease leakage collector, front roller bearing, rear roller bearing,
                        • Power supply : 440 V, 3 Phase


                            Additional Information:

                            • Item Code: WIL-576
                            • Pay Mode Terms: T/T (Bank Transfer)
                            • Production Capacity: 50 Nos
                            • Delivery Time: 2 Months
                            Get Best QuoteRequest Callback
                            Water Washout of Lubricating Grease ASTM D-1264
                            • Water Washout of Lubricating Grease ASTM D-1264
                            • Water Washout of Lubricating Grease ASTM D-1264

                            Water Washout of Lubricating Grease ASTM D-1264

                            Product Price: Rs 1.16 Lakh / NumberGet Best Price

                            Minimum Order Quantity: 1 Number

                            Product Brochure

                            Product Details:
                            MaterialMild Steel
                            Model Name/NumberWIL-572
                            Usage/ApplicationGREASE TESTING EQUIPMENT
                            Type Of Testing MachinesGREASE TESTING EQUIPMENT
                            ColorSiemens Grey
                            Packaging TypeWooden Box
                            Display TypeDigital
                            ApplicationAs per ASTM D-1264.
                            BrandWADEGATI
                              Features:

                              • Comprises of tank assembly, electric heater, digital temperature controller, test bearing housing,
                              • Circulating fluid pump with a supply pressure and a return suction line, regulating valves, a splash nozzle and accessory.
                              • Power supply : 230 V, 1 Phase, 50 Hz


                                  Additional Information:

                                  • Item Code: WIL-572
                                  • Production Capacity: 25 Nos
                                  • Delivery Time: 2 Months
                                  • Packaging Details: 60W X 55D X 60H Cm 45.0 Kg
                                  Get Best QuoteRequest Callback
                                  Salt Spray Test Chamber

                                  Salt Spray Test Chamber

                                  Product Price: Rs 4.75 Lakh / UnitGet Best Price

                                  Minimum Order Quantity: 1 Unit

                                  Product Details:
                                  MaterialCRCA powder coated
                                  Model Name/NumberWIL534
                                  Type Of Testing MachinesGREASE TESTING EQUIPMENT
                                  ColorGREASE TESTING EQUIPMENT
                                  Packaging TypeWooden Box
                                  Usage/ApplicationLaboratory
                                  BrandWadegati Labequip Pvt Ltd
                                  GradeSemi-Automatic
                                  SupplyAC
                                  Power230 Volt AC, 1 Phase, 50 Hz
                                  Voltage230 Volts
                                  PhaseSingle
                                  Product CodeWIL534

                                  SALT SPRAY TEST CHAMBER

                                  As per ASTM B-117, ISO:9227

                                  ·         Cabinet constructed from non-corrodible high temperature resistant glass reinforced plastic. Acrylic cover is provided.

                                  ·         Constructed in fiber-reinforced plastic, 10 mm thick with stiffners at the bottom to take heavy load.

                                  ·         The FOG Chamber conforms to ASTM B 117 specification. The volume is of sufficient size to test adequately the desired number of parts without overcrowding.

                                  ·         The apparatus consists of a fog chamber, a salt solution reservoir, a supply of moisture free compressed air, atomizing nozzles, specimen supports, provision for heating the chamber, humidifying chamber and control system.

                                  ·         The fog chamber is provided with digital temperature controller, pressure gauge, provision for controlling the mist, humidity indicator(optional) and solenoid valve to regulate these conditions.

                                  ·         Capacity : 400 Litters.

                                  ·         Power supply : 440 V, 3 Phase.



                                  Additional Information:

                                  • Item Code: WIL534
                                  • Production Capacity: 15 Nos
                                  • Delivery Time: 2 Months
                                  Get Best QuoteRequest Callback
                                  Roll Stability Of Lubricating Grease ASTM D-1831

                                  Roll Stability Of Lubricating Grease ASTM D-1831

                                  Product Price: Rs 1.66 Lakh / NumberGet Best Price

                                  Minimum Order Quantity: 1 Number

                                  Product Brochure

                                  Product Details:
                                  MaterialMild Steel
                                  Model Name/NumberWIL-578
                                  Usage/ApplicationLaboratory
                                  Type Of Testing MachinesGrease Testing Machine
                                  ColorSiemens Grey
                                  Packaging TypeWooden Box
                                  Display TypeDigital
                                  ApplicationAs per ASTM D-1831
                                  Features:
                                  • Single and dual speed.
                                  • This test is intended to subject lubricating greases to such a shear stresses as are typical of ball and roller bearings.
                                  • A sample of the lubricating grease under evaluation is worked by rollers rotating in cylinders at a specified temperature and the penetration characteristics of the sample before and after rolling compared in a penetration test in compliance with standard.
                                  • Equipped with an air circulated bath digitally controlled upto +165°C.
                                  • 2/4 corrosion proof stainless steel roll test cylinders with stainless steel roller.
                                  • Rotates steel test cylinders at 10 or 165 rpm.
                                  • Power supply : 440 V, 3 Phase.


                                  Additional Information:

                                  • Pay Mode Terms: T/T (Bank Transfer)
                                  • Delivery Time: 2 Months
                                  Get Best QuoteRequest Callback

                                  EXPLORE MORE CATEGORIES

                                  Looking For "Grease Testing Equipment"?
                                  Thank youYour Enquiry has been sent successfully.
                                  © Wadegati Labequip Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.